JK Linear Motion

NOTE- PLEASE ASK THE PRICE


JKL MAKE 4.459 COMBINED BEARING WITH ECCENTRIC PIN

Linear Bearing for Axial & Radial LoadsPrior to welding, disassemble bearing components. To avoidcracks in welded joints, please use welding electrodes and coreweld for unalloyed steel.
MATERIALSOuter ring – Case-hardened steel En 31 - SAE 52100 hardenedat 60+2 HRc


Inner ring – Hardened steel En 31 - SAE 52100 hardened at62-2 HRc
Cylindrical rollers – Flat ground heads are hardened steel,En 31 - SAE 52100, hardened at 59-64 HRC
Bolt tolerance = 0.05 mm
Profile rails – High Quality 18MnNb6 Steel at standard lengthsof 6m (19.7 ft). Yield point of 430 n/mm2, Tensile Strengthof 550-770 N/mm2. Rails are not hardened but have a Brinellhardness of 160-210. The guide ways in the rails should belightly greased and not painted.
Clamp flange – Low carbon steel, adjustable clamp
Flange plate – Low carbon steel. Special designs available,contact manufacturer.
Seals – Bearings with fixed axial bearing (JKL-053 to JKL-063) - radial bearing has steel labyrinth and side guide rollerwith rubber seals.
Bearings with eccentric adjustable axial bearing (JKL-454to JKL-463) - Both radial and axial bearings utilize rubber
JKL Forklift Truck Axial Fixed Combined Roller Bearing

ASK ME PRICE we can't disclose the price on any platform

WD,WINKLE,JKL,PBC COMBINED BEARING
JKL 4.053 30.0 52.5 40.0 33.0 27.0 17.0 5.0 15.0 2.0 460.0JKL 4.054 30.0 62.5 42.0 37.5 30.5 20.0 2.5 20.0 3.0 530.0JKL 4.055 35.0 70.1 48.0 44.0 36.0 23.0 2.5 22.0 4.0 800.0JKL 4.056 40.0 77.7 54.0 48.0 36.5 23.0 3.0 26.0 4.0 1000.0JKL 4.057 40.0 77.7 53.0 40.0 29.0 23.0 3.0 26.0 4.0 875.0JKL 4.058 45.0 88.4 59.0 57.0 44.0 30.0 3.5 26.0 3.0 1630.0JKL 4.059 50.0 101.2 67.0 46.0 33.0 28.0 3.0 30.0 3.0 1750.0JKL 4.060 55.0 107.7 71.0 53.0 39.0 31.0 3.0 34.0 5.0 2275.0JKL 4.061 60.0 107.7 71.0 69.0 55.0 31.0 4.0 34.0 5.0 2825.0JKL 4.062 60.0 123.0 80.0 72.3 56.0 37.0 5.0 40.0 5.0 3890.0JKL 4.063 60.0 149.0 103.0 78.5 58.5 45.0 5.5 50.0 3.0 6525.0

NOTE- PLEASE ASK THE PRICE


Heavy duty linear bearing system that is cost effective for medium to low precision applications.The system is easy to mount align and usel high radial and axial load capacities ensure a long and productive life under continuous use. 

Rack systems and mobile command centers 
combined roller systems handle extremely high loads in industrial strength applications.Systems can be optimized to provide telescopic sliding solutions.

Ergonomic and mobile seat adjustment.
commercial rail roller bearings ,redirail and hardened crown roller each offer reliable mechanical roller systems for seat adjustment in clean and dirty environments.

HVB 053,HVB 054,HVB 055,HVB 056,HVB 057,HVB 058,HVB 059,HVB 060,HVB 061,HVB 062,HVB 063,

U CHANNEL

I CHANNEL

COMBINED ROLLER BEARING WITH FLANGE PLATE 

COMBINED ROLLER BEARING WITHOUT FLANGE PLATE

Material Case hardened steel En 31 SAE 52100 Hardened at 60+2 HRc

inner ring hardened steel En-31 SAE 52100 hardened at 62-2 HRc

flange Plate- Low carbon steel.Special designs available.

USES
Handling units,Lifting units,Adjustable clamp systems
JKL Forklift Truck Axial Fixed Combined Roller Bearing